How do I install my Pure Filters system?

Installing your Pure Filters system is simple and requires no special tools. In just a few minutes, your purifier will be ready to use.

Before you begin

Check that all components are included in your package:

  • The upper stainless steel tank
  • The lower stainless steel tank
  • The lid with its knob
  • The stainless steel faucet with gaskets and washers
  • The Coldstream FTO+ filters
  • The nuts and mounting accessories

Step 1: Install the lid

Attach the knob to the lid using the screw provided.

Simply make sure it is tightened securely so it remains stable during daily use.

Step 2: Install the faucet

Take the faucet and install it on the lower tank.

Position the gaskets and washers correctly to ensure a perfect seal. Tighten firmly by hand, without using tools or applying excessive force.

Step 3: Install the Coldstream FTO+ filters

On the upper tank:

  1. Place the plug on any unused holes if necessary
  2. Insert the Coldstream FTO+ filters into the designated openings
  3. Position the gaskets correctly
  4. Secure the filters with the nuts provided

Important: do not overtighten to avoid damaging the gaskets.

Step 4: Assemble the system

Once the filters are installed:

  • Place the upper tank on the lower tank
  • Close with the lid
  • Fill the upper tank with water

First use: important

On first use, discard the water from the first filtration.

This first water is used to rinse the filters and may contain fine residual particles from the manufacturing process. This is completely normal.

After this initial rinse, your system will be ready to provide filtered water every day.

Installation video tutorial

Find the complete step-by-step guide in our official installation video:

Back }